Filler S2-50
The injector S2 is based on the concept of the K1. Unlike the K1, the S2 consists of a separate barrel and drive unit. These can be disconnected using a quick coupling, allowing the drive to be changed within seconds and without additional tools.This intuitive system shortens employee training times and reduces setup and downtime. We would be pleased to review your production process and provide you with personalized advice regarding the costs and benefits you can expect from this system.
Images are for illustrative purposes only.
Selected configuration:
Item No.: 50903244-009
Drawing No.: 11117-A01
16x50 (D2xL2)
50x313 (D1xL1)
Nozzle MS/RND/AW D3=22
Plunger AL/BED/PLN
Venturi 8x2,5
Material connection Nipple Type D
Cycle counter
Drive Sleeve
Air inputs 8-8-8
Rotation indexed
Maintenance video
Technical drawing
Parts list
| Pos. | Item No. | Description | Quantity |
|---|---|---|---|
| 1.1 | 59204002 | Barrel tube | 1 |
| 1.2 | 59204005 | Inner tube S2 | 1 |
| 1.3 | 59204082 | Piston rod | 1 |
| 2.1 | 59204072 | Tip type F | 1 |
| 2.2 | 59204177-002 | Plunger, complete | 1 |
| 2.2.1 | 59204067 | Plunger | 1 |
| 2.2.2 | 99900002 | Glide seal set, outside sealing | 1 |
| 3 | 59204025 | Nozzle | 1 |
| 4.1 | 59003552 | Nippel type D with male thread | 1 |
| 4.2 | 99900192 | O-ring | 1 |
| 5.1 | 59204113 | Sleeve holder Type 104 with magnet, complete | 1 |
| 5.1.1 | 59204111 | Sleeve holder Type 104 with magnet | 1 |
| 5.1.2 | 99900200 | Sleeve | 1 |
| 5.2 | 59204290 | Cylindercap with counter | 1 |
| 5.2.1 | 59204291 | Counter, complete set | 1 |
| 5.2.1.1 | 59204304 | Circuit board | 1 |
| 5.2.1.2 | 70034729 | Spacer | 2 |
| 5.2.1.3 | 70034728 | Screw | 2 |
| 5.2.1.4 | 94192821 | Button cell | 1 |
| 5.2.2 | 59204510 | Cylinder cap (Part 1) | 1 |
| 5.2.3 | 59204511 | Cylinder cap (Part 2) | 1 |
| 5.2.4 | 99900053 | Gasket | 1 |
| 5.2.5 | 99900515 | O-ring | 1 |
| 5.2.6 | 99900158 | O-ring | 1 |
| 6 | 59204221 | Air connection kit | 1 |
| 6.1 | 80012000 | Push-in elbow-fitting brass | 1 |
| 6.2 | 80012000 | Push-in elbow-fitting brass | 1 |
| 6.3 | 80011700 | Push-in elbow-fitting brass | 1 |
| 7 | 59204245 | Push in adapter | 1 |
| 8 | 59204060 | Center piece with coupling | 1 |
| 8.1 | 59204051 | Cage | 1 |
| 8.2 | 79005084 | Ball | 12 |
| 8.3 | 59204053 | Ring | 1 |
| 8.4 | 99905050 | O-ring | 1 |
| 8.5 | 59204049 | Spring | 1 |
| 8.6 | 59204000 | Center piece | 1 |
| 8.7 | 70001009 | Setscrew | 1 |
| 9 | 99904801 | O-ring | 1 |
| 10 | 99905050 | O-ring | 1 |
| 11 | 99910505 | O-ring | 1 |
| 12 | 59204131 | Bushing, complete | 1 |
| 12.1 | 59204054 | Bushing | 1 |
| 12.2 | 99900202 | Pneumatic seal D-A-F | 1 |
| 12.3 | 99913905 | O-ring | 1 |
| 13 | 99901600 | O-ring | 2 |
| 14 | 59204080 | Cylindertube, aluminum | 1 |
| 15 | 70084301 | Nut | 1 |
| 16 | 70055101 | Disc | 1 |
| 17 | 99900516 | O-ring | 1 |
